The Elite Dispenser is equipped with an X, Y and Z-axis to dispense underfill, dam and fill or corner bond materials. The system allows you to run your production line with a 100% quality control on dispensed material per location. The dispense robot comes with a teach/check camera, computer with DIMASOFT user software, a base for up to 3 modules, one Z-slide, one electronic pressure sensor for the main air supply and one electronic pressure sensor and regulator for the syringe pressure, computer pressure readout, a static PCB holder, fiducial alignment, a dispense library, a management information database and off-line programming software. A sensor for detection of exhaust air is as an option available. The robot can be configured as a batch or in-line machine and can be reconfigured in the field at any time. Several work holders and transport systems are available. All these features make the Elite Dispenser the most flexible to configure and easy to reconfigure robot available for fast and accurate dispensing jobs. Together with the unbeatable DIMA Easy track® off-line programming software, the DIMAsoft User interface and the patented dynamic flow control, Nordson DIMA has created the ultimate machine.
Teaching camera standard
Advanced monitoring for process control
Electronic material pressure control
DIMA Soft rewarded user interface
Easy track© off-line teaching
Automatic fiducial alignment
Modular system free to configure
The Elite Dispenser can be equipped with any DIMA valve. There is always a possibility to upgrade to a piezo jet valve in order to allow finer dispense patterns. When lines have to be created with the jet valve a continuous repeated shot of dots will be fired.
The Elite comes without any material handling system. Depending on the application the material handling system needs to be specified.
Dynamic flow control
The optional patented Nordson DIMA Dynamic flow control allows you to ensure a 100% quality control. Continuously when the dispensing process takes place the amount of material that is flowing through the valve is monitored. As soon as it is of the set value the material flow will be increased or decreased depending on what is required. As soon as it exceeds the limit of the tolerance that you have set it will stop the process and display an error message. This means that every board that leaves the machine automatically is dispensed with the right amount of material in the right spot.
Easy track© real off-line programming software
Easy track is the off-line programming software that really works! It is based on a photograph from your application and loads it into the software. Then work in the comfort of your office on programming your application. Please ask for a demo so that we can convince you that this software really works.
Nordson DIMA has optional bottom heating available. Bottom heating is always specially adapted to the board dimensions that you have to process. The heater is a hot air type heater that will be switched on only when a board is in position.
The Elite can be equipped with an empty detection for the syringes. When a syringe reaches the low level the DR-061 will finish its dispensing cycle and prompt the operator to change the syringe.
All units use the DIMASOFT user interface in combination with the built-in CCD camera. Special tools in the software like a component library for dispensing dots and special teach tools to create circles, areas and lines make sure that programming is done quickly. To program boards off-line or to manage the data the Easy track off-line programming software can be installed on another computer. A background photo of the PCB makes it is easy to off-line define the dispense program.
Standard the Elite is equipped with a static PCB holder and can be upgraded to an in-line machine. Several conveyors are available but for fast dispensing on circuit boards a clamping conveyor is advised. A 3 stage conveyor with clamping in the middle section is also available.