The Hybrid Dispenser HC-100 is equipped with an X, Y and Z axis. The 3 axis robots can handle up to 4 different tools. Tools can be dispense valves, spray valves, grippers etc. They have to be mounted on a Z-slide or a Z-slide combined with a fixed tilt as the fourth axis. This combination has to be mounted on an adapter for 1, 2, 3 or 4 valves. Tools and valves can be configured outside the machine and can be put onto the robot as one unit. The 3 axis robot comes with a camera on the Z axis, computer with DIMASOFT user software, a base for adapter plates (for up to 4 tools), one electronic pressure sensor for the mains air supply, a sensor for detection of exhaust air and illumination inside the machine.
Features
-
Rigid welded Steel frame construction
-
Large working area
-
Z-axis payload 6Kg
-
Teaching camera standard
-
Easy track off-line programming software
-
Advanced monitoring for process control
-
3D-dispensing capability
Options
Some of the options that are available: Automatic XYZ nozzle calibration, Flow monitoring, Dynamic flow adjustment, Touchless needle cleaning, Height detection, Barcode software, Integrated Weight scale and Reservoir empty detection. Even a Pick & Place tool can be integrated into the Hybrid Dispenser.
Flexible configuration
To complete the configuration you have to decide which valves you are going to use, how many different materials you are working with, in what quantity you want to put them to the machine, what you want to monitor, how you want to handle the product and if you want automatic alignment of the product. The machine is equipped as standard with PE material feed tubes. Other material feed tubes, grippers or special pumps are available on request.
Dispensing and Pick & Place in one!
The Pick & Place tool enables the user to perform two processes on one machine: a Dispensing and Pick & Place process in one! First, dispense one of the parts and directly place the second part on top of the other. This way you need only one machine to do the job instead of a separate Dispenser and a Pick & Place machine!
DIMASOFT
All units use the DIMASOFT user interface in combination with the built-in CCD camera. Special tools in the software like a component library for dispense points and special coating teach tools make sure that programming is done quickly. To programme boards or to manage the data the software can be installed free of charge on another computer. Fiducial alignment software is available as an option.
Valves
The Hybrid Dispenser is a must but the valves as a tool combined with process knowledge are the key to successful dispensing. User-friendly operator software is a nice feature, but without the right valves and our process knowledge, you will not get satisfying results. DIMA offers a wide range of valves, process knowledge and test facilities to make your application work.