Valves

Needle Valve DD-5130 - DIMA Group

Needle Valve DD-5130

Shot size from 0.003 ml, low volume

The DD-513X series is a stainless steel high pressure front closing needle valve. One of the unique features is the high flow rate at high viscosity materials and the fast cycle time.
Needle Valve DD-5131 - DIMA Group

Needle Valve DD-5131

Shot size from 0.05 ml, medium volume

The DD-513X series is a stainless steel high pressure front closing needle valve. One of the unique features is the high flow rate at high viscosity materials and the fast cycle time.
Rotary value DD-5100 - Nordson DIMA

Rotary valve DD-5100

Shot size from 0.001 ml.

The Rotary valve is an open type valve. This means that the material is pushed with a low pressure against a rotary feed screw (auger). When the feed screw rotates an exact amount of material gets transported
Rotary valve DD-5105 - DIMA Group

Rotary valve DD-5105

Disposable feed screw and chamber

The Rotary Valve DD-5105 takes a revolutionary unique approach to solving some of the most difficult applications such as: dispensing two-component epoxy and abrasive fluid. The valve contains a disposable feed screw and chamber that can be easily and quickly replaced within seconds, while the production line is still in operation.
Airless Curtain spray valve - Nordson DIMA - Dispensing

Airless curtain spray valve

The DIMA non-atomized coating curtain valve provides automated, selective application of conformal coating materials with viscosities of less than 100 centipoise. Achievable coating thicknesses range from 0,013mm to 0,2mm for solvent-based material and 0,1mm to 0,2mm for 100% solids materials
Narrow beam spray valve DD-5140 - DIMA Group

Narrow beam spray valve DD-5140

Spray diameter: 5 to 15 mm. Max. viscosity 5000 cps

The round spray valve is designed for selective conformal coating but is also used for several other applications
Wide beam spray valve DD-5141 - DIMA Group

Wide beam spray valve DD-5141

Spray diameter: 15 to 45 mm, Max. viscosity 5000 cps

The wide beam spray valve is designed for selective conformal coating but is also used for several other applications. This valve is normally used for large areas as back sides of printed circuit boards.
Jet Valve DD-5161

Jet Valve DD-5161

Shot size from 0.9 nl. Viscosity: max. 2500 cps.

Jet technology is to be considered as one of the most advanced ways of dispensing material for micro dot dispensing.
Jet Valve DD-5162

Jet Valve DD-5162

Shot size from 0.9 nl. Viscosity: max. 100.000 cps.

Jet technology is to be considered as one of the most advanced ways of dispensing material for micro dot dispensing.