The DR-061 Robot is equipped with a X, Y and Z-axis to dispense underfill, dam and fill or corner bond materials. The DR-061 is equipped with the patented Nordson DIMA dynamic flow control system. This system allows you to run your production line with a 100% quality control on dispensed material per location. The DR-061 dispense robot comes with a teach/check camera, computer with DIMASOFT user software, a base for up to 3 modules, one Z-slide, one electronic pressure sensor for the main air supply and one electronic pressure sensor and regulator for the syringe pressure, computer pressure read out, a static PCB holder, fiducial alignment, a dispense library, a management information data base and off-line programming software. A sensor for detection of exhaust air is as an option available. The robot can be configured as a batch or in line machine and can be reconfigured in the field at any time. Several work holders and transport systems are available. All these features make the Elite underfill ll Robot DR-061 the most flexible to configure and easy to reconfigure robot available for fast and accurate dispensing jobs. Together with the unbeatable DIMA Easy track® off-line programming software, the DIMAsoft User interface and the patented dynamic flow control, Nordson DIMA has created the ultimate machine. The DR-061 is a modular concept which allows you to choose between work holders, valves, material tanks and software options. The options will be factory mounted but the flexibility of the modular concept allows you to re-configure your machine in the field at any time.
Teaching camera standard
Electronic material pressure control
DIMA Soft rewarded user interface
Easy track© off-line teaching
Automatic fiducial alignment
Dynamic flow control
Modular system free to configure
The DR-061 can be equipped with any DIMA valve. There is always a possibility to upgrade the DR-061 to a piezo jet valve in order to allow finer dispense patterns. When lines have to be created with the jet valve a continuous repeated shot of dots will be fired.
The DR-061 comes without any material handling system. Depending on the application the material handling system needs to be specified.
Dynamic flow control
The patented Nordson DIMA Dynamic flow control allows you to ensure a 100% quality control. Continuously when the dispensing process takes place the amount of material that is flowing through the valve is monitored. As soon as it is of the set value the material flow will be increased or decreased depending on what is required. As soon as it exceeds the limit of the tolerance that you have set it will stop the process and display an error message. This means that every board that leaves the machine automatically is dispensed with the right amount of material on the right spot.
Easy track© real off-line programming software
Easy track is the off-line programming software that really works! It is based on a photograph from your application and load it into the software. Than work in the comfort of your offi ce on programming your application. Pease ask for a demo so that we can convince you that this software really works.
The DR-061 comes without bottom heating but Nordson DIMA has optional bottom heating available. Bottom heating is always specially adapted to the board dimensions that you have to process. The heater is a hot air type heater that will be switched on only when a board is in position.
The DR-061 can be equipped with an empty detection for the syringes. When a syringe reaches the low level the DR-061 will finish its dispensing cycle and prompt the operator to change the syringe.
All units use the DIMASOFT user interface in combination with the built in CCD camera. Special tools in the software like component library for dispensing dots and special teach tools to create circles, areas and lines make sure that programming is done quickly. To program boards off-line or to manage the data the Easy track off-line programming software can be installed on another computer. A background photo of the PCB makes it is easy to off-line define the dispense program.
Standard the DR-061 is equipped with a static PCB holder. The DR-061 can be upgraded to an in-line machine. Several conveyors are available but for fast dispensing on circuit boards a clamping conveyor is advised. A 3 stage conveyor with clamping in the middle section is also available.