The HC-100 Robot is equipped with an X, Y and Z axis. The 3 axis robots can handle up to 4 different tools. Tools can be dispense valves, spray valves, grippers etc. They have to be mounted onto a Z slide or a Z slide combined with a fixed tilt as the fourth axis. This combination has to be mounted onto an adapter for 1, 2, 3 or 4 valves. Tools and valves can be configured outside the machine and can be put onto the robot as one unit. The 3 axis robot comes with a camera on the Z axis, computer with DIMASOFT user software, a base for adapter plates (for up to 4 tools), one electronic pressure sensor for the mains air supply, a sensor for detection of exhaust air and illumination inside the machine.
To complete the configuration you have to decide on, which valves you are going to use, how many different materials you are working with, in what quantity you want to put them to the machine, what you want to monitor, how you want to handle the product and if you want automatic alignment of the product. The machine is equipped as standard with PE material feed tubes. Other material feed tubes, grippers or special pumps are available on request. For configuration of the machine please contact your distributor or DIMA Group.
All units use the DIMASOFT user interface in combination with the built in CCD camera. Special tools in the software like component library for dispense points and special coating teach tools make sure that programming is done quickly. To programme boards or to manage the data the software can be installed free of charge on another computer. Fiducial alignment software is available as an option.
The robot is a must but the valves as a tool combined with process knowledge are the key to successful dispensing and coating. Of course you need a good robot with user-friendly operator software but without the right valves and our process knowledge you will not get satisfying results. DIMA offers a wide range of valves, process knowledge and test facilities to make your application work.